News

The working ability of UASB anaerobic reactor is obvious to all

Nowadays, UASB anaerobic reactor has been widely used in our lives. This is also because its working ability has been recognized by everyone. As a professional manufacturer in this area, let's tell you about its working ability and let's take a look.

       In addition to our daily domestic water use, industry also consumes a very large amount of water. In industry, water is generally used as the medium as the basis of the entire circulation system. Organic corrosion inhibitors are also used, including organic phosphorus, organic amines, etc., among which organic phosphorus compounds are the leading ones, such as aminotrimethylene phosphonic acid (ATMP), hydroxyethylene diphosphonic acid (HEDP), phosphonobutane tricarboxylic acid (PBTC), polyoxyethylene ether glycerol phosphate, etc. If these phosphorus-containing compounds are directly discharged into rivers and lakes, they will cause eutrophication of water bodies. Well-known red tides and algal blooms are caused by excessive levels of phosphorus compounds in the water.
       So far, the methods commonly used at home and abroad to treat phosphorus in wastewater mainly include traditional chemical methods, biological methods, chemical-assisted biological methods, and the adsorption methods and UASB anaerobic reactors developed in recent years.
Chemical methods are mainly suitable for the treatment of inorganic phosphorus-containing wastewater, and can remove insoluble organic phosphates in the water, but have almost no removal ability for dissolved organic phosphates; biological methods are mainly used to treat low-concentration organic phosphorus-containing wastewater, but their treatment effects are poor and it is difficult to achieve phosphorus discharge standards.
       The UASB anaerobic reactor has shown excellent working results in this regard. The specific treatment process is that there is a lot of biomass in the sludge bed, and the calculated concentration can reach 20~30g/L; the volume loading rate is high, and under medium temperature fermentation conditions, it can generally reach about 10kgCOD/(m³.d), or even as high as 15~40kgCOD/(m.d). The hydraulic residence time of wastewater in the reactor is short, so the required pool volume is greatly reduced. The equipment is simple and easy to operate. It does not require a sedimentation tank and a sludge return device, does not need to be filled with fillers, and does not require a mechanical stirring device in the reaction zone. The cost is relatively low, easy to manage, and there is no clogging problem.

       We have told you in detail about the working capacity of the UASB anaerobic reactor above. You must pay attention to this aspect when using it. We hope that our introduction can help you.